|
Hewlett Packard Works Up A Sweat
When
Hewlett Packard looked for a solution to the problem of sweating air handling
units in a corrosive atmosphere, Technical Sales had the answer - DRS Marlo
Coil. Having picked up the DRS Marlo Coil line in July 1996, Technical Sales
offered our high quality integral thermal break, tongue and groove panel construction
using an 18 gauge stainless steel exterior with an .050" aluminum interior.
Unit walls, roof and floor were filled with the 4" x 3.0 pcf fiberglass insulation.
The unit base frame is 6" x 10 gauge 304 stainless steel.
| Unit Sizes: |
Unit Construction: |
| AHU-02-05 21,000 CFM |
18 Gauge Stainless Steel Exterior |
| AHU-02-06 41,250 CFM |
0.050" Aluminum Interior |
| AHU-02-07 41,250 CFM |
10 Gauge, 304 Stainless Steel Base |
| AHU-02-08 39,500 CFM |
3/16" Aluminum Diamond Tread Plate Floor |
| AHU-03-01 9,865 CFM |
Stainless Steel Fasteners |
| AHU-03-02 25,500 CFM |
0.007" Copper Fins with Stainless Steel Coil Casings |
| |
18 Gauge 304 Stainless Steel Drain Pans |
Components: |
| Airfoil SWSI Plenum Fans With Variable Inlet Vanes |
Aluminum, Airfoil Blade Intake Damper |
| OSHA Belt Guards |
35% Efficient, 4" Side Service Pre Filters |
| High Efficiency, ODP Motors |
85% Medium Filters |
| 100w Marine Duty Service Lights in fan sections |
95% Final Filters |
| ARI Std 410 Certified Chilled Water Coils |
12" Deep, Side Service Riga Flo Cartridge Filters |
| Job Name: Hewlett Packard |
|
| Serial No.:96-24010 |
Job Location: Puerto Rico
Rep Firm: Technical Industrial Sales, Inc.
Salesman: Eduardo Varon
Engineer: Erwing Ortiz
CMA Architects & Engineers |
Unit Tag:
AHU-02-05
AHU-02-06
AHU-02-07 A
HU-02-08
AHU-03-01
AHU-03-02 |
|
